WALL IRONERS

R2D18-R2D25

Catalogues and datasheets

Ø 180 MM DATASHEETS
R2D18-100
R2D18-100N
R2D18-120
R2D18-120N

Ø 250 MM DATASHEETS
R2D25-100
R2D25-100 N
R2D25-120
R2D25-120 N
R2D25-140
R2D25-140 N
R2D25-200
R2D25-200 N

For ironing small flat laundry

In the catering sector, the finishing of table cloth is an important need that does not necessarily require the use of an flatwork dryer ironer, which is more specific to the hotel industry.

Optimising space in restaurants, hostels and small facilities is also an important factor. For this reason, DANUBE has designed and developed a range of ironers that can be installed in very small spaces and require virtually no installation or maintenance.

Advantages of ironers for restaurants and similar

No need of extraction
No specific connection except electric supply
Mural and small

Main features of R2D18-R2D25 wall ironers

Front feed and return.
Panels in skinplate. Top panel in stainless steel.
Roll dimensions: from 1.000 and 1.200 mm wide and 180 mm diameter (R2D18 model)
Roll dimensions: 1.000, 1.200, 1.400 and new 2.000 mm wide and 250 mm diameter (R2D25 model)
Electronic microprocessor: start/stop, selection 4 temperatures (R2D18 model)
Microprocessor with touch screen (R2D25 model)
Electric heating.
Standard model: Roll covered in polyester and cotton felt.
Nomex model: padded and covered in Nomex, to work at higher temperatures, up to 190ºC.
Chest in anodized aluminium.
Manual lifting of the chest by new pedal (R2D18 model), automatic by detection cell (R2D25 model)
Wooden feeding table